×

Discussion Board

Results 1 to 4 of 4
  1. #1
    Registered User
    Join Date
    Mar 2003
    Posts
    32

    how to encode a number

    My number is soemthing like +6016 411 5155
    Do note that it contains 11 numbers, odd
    i tried to encode is to 06 61 14 51 51 50
    I can send the message (nokia example), and Hyperterminal responce me with something like
    +CGMS: 111
    OK
    but i din receive anything.

    Is there an error in my encoding? Please help.

  2. #2
    Nokia Developer Expert
    Join Date
    Mar 2003
    Location
    Tampere / Finland
    Posts
    1,839

    RE: how to encode a number

    Hello!

    Here is the example:
    0B910661145151F5

    Where 0B is the length and 91 is the international notation "+".

    Teemu / Forum Nokia

  3. #3
    Registered User
    Join Date
    Mar 2003
    Posts
    32

    RE: how to encode a number

    Hi, thanks. It helps.

    I have a question concerning how to send an operator logo.
    I am trying to send the logo in the Nokia Example.
    And i understand that i need to add the whole sms submit pdu.
    So I copy the example before the operator logo example which shows how to send a 8 bit data and data header.

    I got the part(ams submit pdu): 0051000B910661145151F500F5A724

    And my operator logo is(first msg) :
    0B 05 04 15 82 00 00 00 03 01 02 01
    30 05 F2 61 0A 00 48 0E 01 00 00 00 00 00 00 00
    00 00 00 00 00 00 00 00 00 00 00 1E 00 00 00 00
    02 00 00 00 21 00 00 01 00 02 00 00 00 21 00 00
    01 00 02 00 00 00 21 3C 73 39 9C C2 07 1E 70 21
    22 8A 05 22 82 08 A2 88 21 22 FA 3D 22 82 08 A2
    88 21 22 82 45 22 82 08 A2 88 21 22 8A 45 22 82
    08 A2 88 1E 3C 72 3C 9C 83 E7 1E 70 00 20 00 00
    00 00 00 02 00 00 20 00 00 00 00 00 3C 00 00 00

    I append the logo to the sms submit pdu.
    i then type
    AT+CMGF=0
    AT+CMGS=155
    <paste the logo + sms submit pdu here><CTRL + Z>
    But Immediately after I press CTRL + z
    hyperterminal Says Error

    Can you tell me what I've missed?

  4. #4
    Registered User
    Join Date
    Mar 2003
    Posts
    32

    RE: how to encode a number

    I actually convert it to 24 -> 8C because i know that that's the length.
    But it stills gives me Error right away after i pressed CTRL + Z

    Okay, actually what is the step for sending an Operator logo with two message? Send both og them just like sending normal sms?

    AT+CMGF=0
    AT+CMGS=155
    ....................<CTRL+Z>
    +CMGS: 189
    OK

    AT+CMGS=34
    ....................<CRTL+Z>
    +CMGS: 190
    OK


    Like this?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
×