Hello,

I am working on an OTA solution that will automate the configuration of the Real Player application that is preinstalled in the new Nokia handsets.

The settings that I need to send to the handsets are the followings (all for the same service):
Data Account:
Name: Test MTV
APN: mtv.test.com
Username: wap
Password: wap
Streaming settings (for the RealPlayer or for any Nokia embedded player)
Data account to be used: Test MTV (the one defined above)
MIN-UDP-PORT: 3000
MAX-UDP-PORT: 5000

I have spent many hours studying the specification documents of OMA and the information available in the Nokia forum, but unfortunately although the settings are received from the handset, the Real player is not actually configured.

The XML file that we are sending via some binary SMS messages has the following entries:

<wap-provisioningdoc>
<characteristic type="BOOTSTRAP">
<parm name="NAME" value="Test MTV"/>
</characteristic>
<characteristic type="NAPDEF">
<parm name="NAME" value="Test MTV"/>
<parm name="NAPID" value="Test_MTV_NAPID"/>
<parm name="BEARER" value="GSM-GPRS"/>
<parm name="NAP-ADDRESS" value="mtv.test.com "/>
<parm name="NAP-ADDRTYPE" value="APN"/>
<parm name="INTERNET"/>
<characteristic type="NAPAUTHINFO">
<parm name="AUTHTYPE" value="PAP"/>
<parm name="AUTHNAME" value="wap"/>
<parm name="AUTHSECRET" value="wap"/>
</characteristic>
</characteristic>
<characteristic type="APPLICATION">
<parm name="APPID" value="554"/>
<parm name="TO-NAPID" value="Test MTV_NAPID"/>
<parm name="NAME" value="Test MTV settings"/>
<parm name="MIN-UDP-PORT" value="3000"/>
<parm name="MAX-UDP-PORT" value="5000"/>
</characteristic>
</wap-provisioningdoc>

Please let me know if you could support me with this or please inform me to whom I should attend for support.

Many Thanks in advance.
BR/Yiannis