×
Namespaces

Variants
Actions

Carbide.c++ Tutorial 7 - Signing with Developer Certificate

From Nokia Developer Wiki
Jump to: navigation, search
Article Metadata
Article
Created: vdharankar (30 Sep 2009)
Last edited: hamishwillee (20 Jul 2012)

Contents

Introduction

Carbide.c++ can simplify the sis file signing task greatly, due to the GUI interface provided. Carbide.c++ provides a form based interface to specify all the required parameters for signing a sis file. This tutorial will give a general idea about the settings required and the place where they can be found.

The Example

For this signing tutorial any example discussed so far can be used.

The step by step guide

Step 1 - Obtain a developer certificate

This step assumes that you will carry out all the required steps to obtain a developer certificate from www.symbiansigned.com. Several good documents are available around describing this process.

Step 2 - Select a configuration

We usually sign the sis file to install on device, so we need to build the sis file for "device release" configuration. Once this is done sign the sis file generated. For this

 1) Select the configuration from Carbide.c++, to do this right click on the project name from project window.
 2) Select the properties. Now select "Carbide.c++" option.
 3) Now you must see the "Build Configurations" under that.
 4) Select the "Build Configuration" option and you will see following window.

Symb sign 1.JPG

Step 3 - Add the sis file to configuration

In this step we set the sis file and other necessary properties.

 Now click on "Add" button a following form will popup.

Symb sign 2.JPG

Now we need to select many parameters here.

1) Select the PKG file which contains the SIS file creating information.
   Under "Signing Options" select "Sign SIS file with certificate/key pair".

When you get the developer certificate from Symbian you get two files "certificate" file having extension ".cer" and a key file with ".key" extension.

2) Now under field "Sign sis file name" mention the output file name that you desire. Usually "sisx" extension is used.
3) Next specify the "Password" which you received from "signing" authority such as "Trust Center".
4) Next specify the ".cer" file as certificate file and ".key" file as key file by browsing the appropriate location.

And we are done.Click "OK" button and "Apply" and then "OK" on subsequent dialog/form. Now when the project is "built" the sis file gets signed with the certificate you specified.

Conclusion

This small guide for the Carbid.c++ IDEs signing facility will help developers in configuring the project to generate device installable "sis" files.

Back to the tutorial

Here you can visit the main page of tutorial

This page was last modified on 20 July 2012, at 10:16.
65 page views in the last 30 days.
×