Nokia N950 OneClickFlashers Troubleshooting

From Nokia Developer Wiki
Jump to: navigation, search


If you have problem using OneClickFlashers (execution stops at line "Erasing, this may take a while."), you need to extract (using WinRAR) Win_OCF_22-6_EMMC_RM680-OEM1-916.exe to folder and install unpacked "Nokia_Connectivity_Cable_Driver.msi".
Then you can open "flasher.bat" on editor and perform actions manually or enter to cmd.exe in current folder next line

flasher.exe -F RX-71.bin -F EMMC.bin -f
flasher.exe -F RX-71.bin -F EMMC.bin --flash-only=mmc -f

and connect the phone with the USB cable. Then you need restart phone after flashing. Use next command:

flasher.exe -R
Article Metadata
Created: (19 Nov 2011)
Last edited: hamishwillee (13 Jun 2012)
This page was last modified on 13 June 2012, at 13:54.
60 page views in the last 30 days.

Was this page helpful?

Your feedback about this content is important. Let us know what you think.


Thank you!

We appreciate your feedback.