×
Namespaces

Variants
Actions

Archived:Streaming 3GP multimedia content to Flash Lite using RTSP

From Nokia Developer Wiki
Jump to: navigation, search

Archived.pngArchived: This article is archived because it is not considered relevant for third-party developers creating commercial solutions today. If you think this article is still relevant, let us know by adding the template {{ReviewForRemovalFromArchive|user=~~~~|write your reason here}}.

We do not recommend Flash Lite development on current Nokia devices, and all Flash Lite articles on this wiki have been archived. Flash Lite has been removed from all Nokia Asha and recent Series 40 devices and has limited support on Symbian. Specific information for Nokia Belle is available in Flash Lite on Nokia Browser for Symbian. Specific information for OLD Series 40 and Symbian devices is available in the Flash Lite Developers Library.

Article Metadata
Article
Created: ramesh130 (07 Jun 2010)
Last edited: hamishwillee (14 May 2013)
Featured Article
20 Jun
2010


Contents

Streaming 3GP multimedia content to Flash Lite using RTSP

This article explains how to set up 3GP streaming using Real-Time Streaming Protocol (RTSP) in Flash Lite from Adobe.

Prerequisite

Flash Lite 3.x

All details mentioned in this article have been tested on Flash Lite 3.0 devices on Symbian S60 3rd Edition mobile devices.

Darwin Streaming Server

Darwin Streaming Server (DSS) is an open source, free-to-use streaming server from Apple. The commercial version of this server is the Quick Time Streaming Server. The open source version can be downloaded from the following link:

http://static.macosforge.org/dss/downloads/DarwinStreamingSrvr5.5.5-Windows.exe

Perl

Perl is a prerequisite for DSS installation. Install it before installing DSS:

http://www.activestate.com/activeperl/downloads

MP4Box

MP4Box is a tool used for “hinting” the 3GP media files. It can be downloaded from the following location:

http://www.videohelp.com/tools/mp4box

QuickTime Player (optional)

Introduction

There are two major methods of multimedia content delivery on the internet:

1.       Streaming

2.       Progressive download

Streaming makes use of RTSP/RTP/RTCP protocol stacks to deliver real-time media content over the Internet. It runs on top of the UDP protocol stack, hence the delivery of RTP packets is not guaranteed. The player has to employ error concealment algorithms to compensate for the lost packets. However, this method is fast and there is no retransmission overhead, making it the right choice for real-time media delivery applications such as Live TV, video conferencing, and so on. An RTSP streaming server such as Darwin or Helix is required.

Progressive download, on other hand, uses the same set of protocol stacks that are used for downloading a web page by a browser—namely, HTTP over TCP/IP protocol stacks. However, the player doesn’t wait for the entire media file to be downloaded and can start the playback as soon as sufficient data required for the codec to start decoding has been received. This provides the benefit of having guaranteed delivery, hence the player doesn’t have to worry about error concealment. As a result, the video plays without any artifacts. This method requires a standard HTTP server such as Apache.

Another option for streaming is using RTMP, which is a proprietary protocol of Adobe developed for streaming audio/video data to Flash. RTMP also employs a TCP/IP protocol stack. It tries to achieve real-time delivery over a reliable connection. Most Content Delivery Networks (CDNs) deploy RTMP for flash streaming. The method requires Adobe Flash Media Server or Wowza. Red5 is an open-source flash-streaming server.

A detailed discussion of streaming and progressive download is beyond the scope of this article.

Flash Lite 3.x supports both HTTP-based progressive download and streaming. The codecs below can be used with each of the delivery mechanisms:

 

Media Container Format

Video Codec

Audio Codec

Progressive Download

FLV

On2 VP6/Sorenson Spark

MP3

Streaming

3GP/MP4

MPEG-4/H.264/H.263

MP3/AAC

 

For a more detailed list of supported codecs, please see the device specifications at:

http://www.developer.nokia.com/Devices/

Because this article addresses streaming, the discussion will be restricted to 3GP files. 3GP is a container for audio and video data. Video can be encoded using MPEG-4/H.264/H.263 codecs; audio can be encoded using the MP3 or AAC codec. Other formats may be possible but were not tested. The following is the recommended video specification for 3G:

Resolution – 320 x 240

Frame rate – 25 frames per second (fps)

Bit rate – 360 KBps (Kilo Bits Per Second)

The recommended audio encoding is:

Sampling rate – 44.1 KHz

Channel – Stereo

Bit rate – 128 KBps

The above settings offer a good trade-off between the available 3G channel bit rate and quality. H.264 outperforms MPEG-4 and H.263, that is, it gives much better visual quality for the same bit rate. Similarly, AAC outperforms MP3 for audio. The encoding parameters, such as codec, bit rate, frame per second, audio sampling rate, and so on, can be decided based on the application needs, available bandwidth, and device capabilities.

Typically for 3G, a bit rate of 260 to 500 KBps gives a good performance and offers a good trade-off between bit rate and quality. Once the 3GP file is created, it has to be “hinted” by MP4Box to allow DSS to stream that file. Use the following command for hinting:

Mp4box –hint filename.3gp

If hinting is not done, the player will give an unsupported format error. Once “hinted”, the files can be placed in the following folder and streamed using DSS:

C:\Program Files\Darwin Streaming Server\Movies

Darwin installation

The path given for the Movies (above) is the default location of the Darwin installation. The steps for installing DSS are as follows:


Image rp 001.jpg

Extract the DSS setup to any desired location.

Image rp 002.jpg

Browse to that location and double click on install.bat. The installation will begin.

Image rp 003.jpg

You will be asked for an admin password, which can be specified, or simply press Enter for no password.

Image rp 004.jpg

DSS is installed as a service and there is no need to launch it manually.

Image rp 005.jpg

DSS can be viewed in the list of running services (start->control Panel->administrative Tools->Services).

To test the installation, enter the following URL in the QuickTime Player. Audio and video must play.

Rtsp://IP-ADDRESS/sample_50kbit.3gp

Flash Lite coding

Coding for video playback using Flash Lite is pretty straightforward. In Adobe Flash CS4, place a video object on the stage by right-clicking on the library, selecting New Video, and then dragging the symbol to the stage. Give an instance name ‘videowindow_vid’ to the component. Put the following code in the script:


 

videowindow_vid.play("rtsp://10.55.104.74/sample_50kbit.3gp");

videowindow_vid.onStatus = function(status_obj:Object) {

//handle status “"completed"”

};

 

The onStatus handler is invoked only for ‘completed’ status. To play back local 3GP files, instead of the URL, use only the file name with the appropriate path.

Limitations

The following are the limitations of 3GP in Flash Lite:

1.     Because the native player is used, nothing can be overlaid on top of the video.

2.     A streaming server is required.

3.     The content requires modifications—the 3GP clips need hinting for DSS. If only audio streaming is desired, the audio (AAC) needs to be packaged as 3GP and hinted for it to work on a Nokia device.

4.     No metadata information or player status information is received. Thus, a mechanism for separately delivering the metadata information for the media files has to be provided so that the player can show the duration, progress, and so on. Also, if the player buffers, the status cannot be shown to the user.

5.     Flash Lite volume control doesn’t work, so the application has to rely on the hardware volume keys for control.

This page was last modified on 14 May 2013, at 09:11.
205 page views in the last 30 days.
×