×
Namespaces

Variants
Actions
Revision as of 01:21, 23 February 2012 by hamishwillee (Talk | contribs)

Archived:CTelephony::DialNewCall() API gives connection error in dual mode (Known Issue)

From Nokia Developer Wiki
Jump to: navigation, search

Archived.pngArchived: This article is archived because it is not considered relevant for third-party developers creating commercial solutions today. If you think this article is still relevant, let us know by adding the template {{ReviewForRemovalFromArchive|user=~~~~|write your reason here}}.

Fixed in new later firmware version.

Article Metadata
Tested with
Devices(s): S60 3rd Edition 3G devices
Compatibility
Platform(s): S60 3rd Edition
3rd Edition, FP1
S60 3rd Edition FP1
S60 3rd Edition (initial release)
Article
Created: copyeditor (14 Feb 2008)
Last edited: hamishwillee (23 Feb 2012)

Description

After programmatically hanging up an outgoing call created by the user or by another application, (using, for example, CPhCltCommandHandler::Chup() or the Phone Client API), an attempt to create a new call with CTelephony:DialNewCall() may fail.

When the device is in a 3G network and a new call is established immediately after the previous call has been terminated, call creation may fail with the telephony application displaying a Disconnected note. Note that this behavior has only been observed in 3G networks when using a device in 2/3G dual mode.

Solution

No known solutions for 3G (dual) network mode, however adding a delay between hangup and call creation increases the success rate. It has been also observed that new firmware versions do not have this problem anymore; for example, the issue cannot be reproduced with Nokia N95 sw v20.0.015.

Note.pngNote: This known issue was originally created by Krugliy and has been verified by Nokia Developer.

121 page views in the last 30 days.

Was this page helpful?

Your feedback about this content is important. Let us know what you think.

 

Thank you!

We appreciate your feedback.

×