Mobile Design Pattern: Slider Control
This design pattern is part of the Mobile Design Patterns series.
A control which enables the user to choose one distinct value within a finite range by dragging (or simulating the dragging) of) one or more sliders along a single axis.
- Highly visual and intuitive—especially when representing a familiar scale of values.
- Only suitable when the list of values is short and there is enough context to make an informed decision regarding the likely impact of the chosen increment.
- The user’s mental model of a series of values is closely tied to an increasing or decreasing scale and limited amount of discrete values. Ex. Controls to increase/decrease brightness, contrast, intensity or volume.
- The slider works in a similar manner to a real-world physical control. The user presses on the slider handle (to simulate grasping) then (while continuing to press), drags the handle to the desired incremental stop position.
- A two-handle control can also be used (on touch devices only) to set a range of values. In this case, one slider provides the minimum value and the other the maximum value—thereby creating a range.
- The slider handle is either provided with immediate focus or the user can focus the control then manipulate it. (see example below)
- The slider handle is mapped to the Left/Right keys (for a horizontal control) or Up/Down keys (for a vertical control).
- Each click of the keys moves the slider handle by one pre-set increment.
- Holding Down may automatically repeat the adjustment until the key is released.
Figure: The S60 Equalizers must each be focussed before they can be manipulated.
- Adding tick marks (or other visual waypoints) enables users to more accurately gauge the incremental change in values.
- Pairing the slider with a visual representation of the change in value can also be useful. Ex. A Real-time RGB colour picker updates the colour values in real time as you manipulate each slider.
Figure: Various sliders in use within S60; each providing varying degrees of feedback. The ‘Ringing Volume’ control functions in a in a similar manner but does not provide an actual slider—only the accompanying ‘increasing scale’ visualization.
Figure: Examples of QT for S60 embedded widget sliders for touch devices.