×
Namespaces

Variants
Actions
(Difference between revisions)

Working with Carbide.c++ IDE for Qt Mobility APIs

From Nokia Developer Wiki
Jump to: navigation, search
kiran10182 (Talk | contribs)
(Created page with 'Category:Qt for Symbian {{Tip| Read this article before moving forward: Setting up environment for Qt Mobility API}} == Overview == This article is a base for creating …')
 
kiran10182 (Talk | contribs)
m
Line 1: Line 1:
[[Category:Qt for Symbian]]
+
[[Category:Qt]][[Category:Qt for Symbian]][[Category:Carbide.c++]][[Category:IDE]]
  
 
{{Tip| Read this article before moving forward: [[Setting up environment for Qt Mobility API]]}}
 
{{Tip| Read this article before moving forward: [[Setting up environment for Qt Mobility API]]}}
  
== Overview ==
+
= Overview =
 
This article is a base for creating a new project to work with Qt Mobility APIs in this series. The subsequent articles are based on the project template explained in this article.  
 
This article is a base for creating a new project to work with Qt Mobility APIs in this series. The subsequent articles are based on the project template explained in this article.  
  
  
== Introduction ==
+
= Introduction =
 
In this series, Carbide.c++ v2.4 is used as an IDE. At the time of writing, Carbide.c++ v2.4 does not come with a single installation package. User needs to first download Carbide.c++ v2.3. Once downloaded, upgrade it to Carbide.c++ v2.4 as shown in the following points.
 
In this series, Carbide.c++ v2.4 is used as an IDE. At the time of writing, Carbide.c++ v2.4 does not come with a single installation package. User needs to first download Carbide.c++ v2.3. Once downloaded, upgrade it to Carbide.c++ v2.4 as shown in the following points.
  
Line 14: Line 14:
  
  
== Steps ==
+
= Steps =
===Create a new Qt project from Carbide.c++ as shown in this image ===
+
==Create a new Qt project from Carbide.c++ as shown in this image ==
 
[[File:FileMenu.PNG]]
 
[[File:FileMenu.PNG]]
  
=== Select a Qt GUI Widget project type as shown in this image ===
+
== Select a Qt GUI Widget project type as shown in this image ==
 
[[File:ProjectWizard.PNG]]
 
[[File:ProjectWizard.PNG]]
  
=== Create a new project by providing a name as shown in the following image ===
+
== Create a new project by providing a name as shown in the following image ==
 
[[File:CreateProjectName.png]]
 
[[File:CreateProjectName.png]]
  
=== Select a preferred SDK from the available SDKs supported by Qt ===
+
== Select a preferred SDK from the available SDKs supported by Qt ==
 
[[File:SDKSelection.PNG]]
 
[[File:SDKSelection.PNG]]
  
=== Proceed with the next step. Press "Next" with the default selection as shown below ===
+
== Proceed with the next step. Press "Next" with the default selection as shown below ==
 
[[File:Next.PNG]]
 
[[File:Next.PNG]]
  
=== Press Finish ===
+
== Press Finish ==
 
{{Tip|At the time of writing, there is a small issue with the Qt for Symbian project creation in the Carbide.c++ v2.4 with the randomly generated UID. With the new project creation, it should generate Random UID by default but it does not. To make sure it creates a new random UID with each new project, press on "Random" button as shown in the following image.}}
 
{{Tip|At the time of writing, there is a small issue with the Qt for Symbian project creation in the Carbide.c++ v2.4 with the randomly generated UID. With the new project creation, it should generate Random UID by default but it does not. To make sure it creates a new random UID with each new project, press on "Random" button as shown in the following image.}}
 
[[File:RandomUID.PNG]]
 
[[File:RandomUID.PNG]]
  
  
== Articles in this series ==  
+
= Articles in this series =  
 
* [[Getting started with Qt Mobility APIs]]
 
* [[Getting started with Qt Mobility APIs]]
 
* [[Setting up environment for Qt Mobility API]]
 
* [[Setting up environment for Qt Mobility API]]

Revision as of 20:58, 31 March 2010


Tip.pngTip: Read this article before moving forward: Setting up environment for Qt Mobility API

Contents

Overview

This article is a base for creating a new project to work with Qt Mobility APIs in this series. The subsequent articles are based on the project template explained in this article.


Introduction

In this series, Carbide.c++ v2.4 is used as an IDE. At the time of writing, Carbide.c++ v2.4 does not come with a single installation package. User needs to first download Carbide.c++ v2.3. Once downloaded, upgrade it to Carbide.c++ v2.4 as shown in the following points.


Steps

Create a new Qt project from Carbide.c++ as shown in this image

FileMenu.PNG

Select a Qt GUI Widget project type as shown in this image

ProjectWizard.PNG

Create a new project by providing a name as shown in the following image

CreateProjectName.png

Select a preferred SDK from the available SDKs supported by Qt

SDKSelection.PNG

Proceed with the next step. Press "Next" with the default selection as shown below

Next.PNG

Press Finish

Tip.pngTip: At the time of writing, there is a small issue with the Qt for Symbian project creation in the Carbide.c++ v2.4 with the randomly generated UID. With the new project creation, it should generate Random UID by default but it does not. To make sure it creates a new random UID with each new project, press on "Random" button as shown in the following image.

RandomUID.PNG


Articles in this series

94 page views in the last 30 days.

Was this page helpful?

Your feedback about this content is important. Let us know what you think.

 

Thank you!

We appreciate your feedback.

×